Mopar Parts
in Dubai
& the UAE

Mopar is Stellantis's genuine-parts brand covering all four American makes we service in the UAE: Dodge (Charger, Challenger, Durango), Jeep (Wrangler JL and JK, Grand Cherokee, Cherokee), Chrysler (300C, 300S), and RAM (1500, 2500, 3500). No other OEM parts brand in our stock covers this range of American vehicles under one name.

Parts families we hold on the shelf: brake pads, rotors, and caliper hardware across all four makes; Jeep suspension control arms, track bars, and sway bar links; Dodge Charger and Challenger engine accessories and ignition components; RAM 1500 and 2500 transmission and transfer case filters; Chrysler 300C cooling system components. If your service manual names a Mopar part number, send it to us on WhatsApp.

Mecanum stocks genuine Mopar parts as an independent supplier. We are not an authorised dealer or franchised distributor. Parts are sourced through verified supply channels; every number is cross-checked against Stellantis catalogue data before it ships.

Every Mopar part number carries a two-letter revision suffix. AA is the first production release, AB the first revision, AC the second, and so on. When Stellantis updates a part -- material change, supplier change, or engineering correction -- the base number stays the same and the suffix increments. 68409860AB and 68409860AC are the same part in different revisions; the AC suffix is current. The fitment table on this page lists the current suffix for each number at the time of research.

Supersession happens when a part number is retired in favour of a new base number entirely. If you quote a number from an older service manual, we cross-check it against the live Stellantis catalogue. Where a number is superseded, we quote the replacement and confirm fitment. The spark plug SP149125AF in our reference table is an example: it supersedes SP149125AE, same application, updated formulation.

VIN confirmation matters most where revision history is long. A part covering a 10-year model range may have passed through AA, AB, AC and AD revisions, with each change tied to a specific production date band within that range. Your 17-digit VIN carries the plant code, model year, and production sequence that identifies which revision matches your vehicle. WhatsApp VIN and part number; we confirm the correct suffix before reserving.

The table below lists 22 verified Mopar part numbers sourced from store.mopar.com for Jeep, Dodge, RAM, and Chrysler vehicles. These numbers are published to help you identify the correct part before contacting us. They are a fitment reference, not a stock or price list. Availability for any specific number is confirmed on WhatsApp against your 17-digit VIN before anything is reserved.

Several numbers span broad model and year ranges. Where the application is wide, VIN confirmation is particularly important: the same part number can cover different sub-variants, engine specs, or production dates within a given year range. Send us the number and your VIN on WhatsApp and we confirm the exact match.

Dodge Charger and Challenger: brake hardware (pads, rotors, caliper kits), HEMI ignition components (spark plugs, coils), engine oil and air filters, and suspension parts. The 5.7L R/T and 6.4L Scat Pack carry different front caliper hardware. The 6.2L Hellcat and Redeye use unique rotor dimensions not shared with the standard R/T. Quote VIN for any Charger or Challenger brake order.

Dodge Durango: brake pads and rotors across the 3.6L V6 and 5.7L HEMI variants, engine air and oil filters, water pump, and transmission service items. Citadel and SRT trims carry brake hardware specific to the higher GVWR rating; VIN distinguishes them from the standard pack.

Jeep Wrangler JK (2007-2018): suspension control arms, track bars, sway bar links, front and rear Dana 44 axle seals, valve cover gaskets (both sides), brake pads and rotors, A/C compressor, and engine air and cabin filters. JK parts do not cross to JL; generation check is mandatory for every order.

Jeep Wrangler JL (2018+) and Gladiator JT: updated brake hardware (pads and rotors), front and rear suspension links, Dana 44 and Dana 60 Rubicon axle seals, engine and cabin filters, and transmission service filters. The Gladiator JT shares significant parts with the JL platform; confirm model and trim via VIN.

Jeep Grand Cherokee WK2 (2011-2021) and Cherokee: brake pads, rotors, suspension control arms, engine mounts, water pump, and cooling system components. SRT and Trackhawk trims use dedicated Brembo-caliper brake hardware not shared with standard WK2 non-SRT trims; VIN is mandatory.

RAM 1500: the DS-platform (2002-2018) and DT-platform (2019+) have limited brake and suspension hardware overlap. Filters, spark plugs, and transmission fluids can span both; brake rotors do not. Platform confirmation via VIN is required before any brake or suspension order.

RAM 2500 and 3500: heavy-duty front rotors (significantly larger than 1500 equivalents), front coil spring and torsion bar suspension, rear drum brake hardware for both axle configurations, transfer case service parts, and Dana 60/70 axle components. The 3500 dually rear axle hardware differs from the single-rear-wheel spec. Always quote GVWR and VIN.

Chrysler 300C and 300S: cooling system components, ZF 8HP 8-speed automatic transmission fluid, engine oil filters, suspension bushings, and brake hardware. The 5.7L and 6.4L SRT trims carry dedicated brake hardware. The Pentastar 3.6L and HEMI 5.7L oil filter requirements differ; VIN confirms the correct part.

Mopar covers four genuinely different vehicle segments. Dodge Charger and Challenger owners are performance-oriented. Their common Mopar requests run to brake upgrades, HEMI ignition components, and suspension parts that hold alignment under hard cornering. Jeep Wrangler and Grand Cherokee owners are off-road buyers. Mopar suspension components, front and rear axle seals, and Dana differential parts are the regular requests.

Chrysler 300C and 300S owners want comfort and reliability. Cooling system components, transmission service parts, and power steering hardware are the typical requests. RAM 2500 and 3500 owners are working-vehicle buyers who need heavy-duty brake and suspension parts rated for payload. We know each profile and stock accordingly.

Mopar fitment is generation-sensitive in ways that catch buyers off guard. Jeep Wrangler JL (2018+) and JK (2007-2018) have very limited parts interchangeability. Suspension links, track bars, differential covers, and axle shafts are generation-specific. The same model name covers two fundamentally different architectures. Your VIN distinguishes them.

RAM trucks add a payload dimension: the 1500 (half-ton) and 2500 (three-quarter-ton) share only a small fraction of their brake and suspension hardware. A 2500 brake rotor is significantly larger than the 1500 equivalent and not interchangeable. For any RAM above 1500, send us your VIN and GVWR rating on WhatsApp. We confirm the correct heavy-duty specification before you collect.

Revision suffixes compound fitment complexity. A part number that spans ten model years may have passed through multiple AA/AB/AC revisions, with each revision tied to a production date range rather than a clean model-year boundary. Send us the part number from your service manual alongside your VIN. We cross-check the current suffix and confirm whether the number is still active or has been superseded.

Our Mopar stock is at KAW Warehouse 1, Nadd Al Hamar Road, Ras Al Khor Industrial Area 2, Dubai. We are open Saturday to Thursday 08:30-19:30; Friday 08:30-12:00 and 15:00-19:30. Shelf orders received before noon are dispatched the same day within Dubai. UAE-wide next-working-day delivery covers Abu Dhabi, Sharjah, Ajman, and the Northern Emirates.

Send the part list on WhatsApp with each VIN. We confirm what is on the shelf and identify what must be sourced. We do not hold stock for unconfirmed orders.

Mopar genuine parts carry a manufacturer's warranty against defects in materials and workmanship. Claims require proof of fault: a workshop inspection report or a documented failure description.

Electrical components (sensors, body control modules, ignition parts) are not returnable once installed. For performance builds on Charger and Challenger, confirm the specification with us on WhatsApp before ordering; an incorrect part on a HEMI application is a wrong-part selection, not a warranty claim. We help you confirm the right part before you commit.

The Mopar shelf at Ras Al Khor runs across all four Chrysler-group makes present in the UAE: Chrysler (200, 300C), Dodge (Durango, Dart, Avenger, Caliber), Jeep (Wrangler JK), and broader Stellantis platform fluids serving the whole lineup. The table below reflects Mecanum's shelf and demand records for Mopar and genuine Chrysler-group parts, reviewed September 2026.

This is a reference list of what the counter routinely carries for Chrysler-group vehicles, not a real-time availability check. Confirm shelf status before you travel: send the 17-digit VIN on WhatsApp, and the counter identifies your generation, engine spec, and trim before confirming availability.

A Pentastar 3.6L thread runs through much of this pack: oil filters for the Chrysler 200 and 300C, a spark plug for the Durango 3.6L, and the 3.6L oil cooler assembly all appear as consistent shelf items. Jeep Wrangler JK valve cover gaskets for left and right sides appear as paired demand, reflecting the common workshop practice of replacing both sides together. The ZF 8HP 8-speed transmission fluid is the pack's single highest-demand item.