Chrysler Parts
in Dubai
& the UAE

Both the 300C and 300S run on the LX platform, but they differ in engine specification and trim hardware. The 300C carries the 5.7-litre HEMI V8 in most UAE-market configurations; the 300S runs the Pentastar 3.6-litre V6. Part families that diverge between these two include brake rotor sizing on certain year ranges, engine-specific filters, and ignition components. Ordering by model name alone is not enough. Your VIN resolves the configuration.

Parts we hold on the shelf at Ras Al Khor for the Chrysler 300 range: front and rear brake pads and rotors, engine and cabin air filters, oil filters, power steering hoses and fluid, cooling system hoses and thermostat housings, front suspension control arm bushings and ball joints, and transmission service components. WhatsApp your VIN and the part or system you need; we check the shelf before you commit.

For Chrysler 300C HEMI applications, confirm the brake specification first. UAE-market models with the optional Brembo brake package use different pad and caliper specifications compared to the standard brake fit. We identify the brake package from your VIN before quoting.

Mopar is the OEM parts brand for all Chrysler vehicles. For the 300C and 300S, the Mopar line covers brake hardware, engine service parts, transmission components, and cooling system components. See our Mopar brand page at /brands/mopar for the full scope across all four Stellantis makes we carry. For Chrysler 300 specifically, the Mopar line is the correct choice where an exact factory specification is needed.

We also carry selected aftermarket lines for Chrysler 300 where the fit is documented. Brake pads from tier-1 manufacturers are available for non-HEMI 300S applications where replacement intervals are the main concern. Air, oil, and cabin filter kits from established manufacturers are available as a lower-cost service option. For HEMI and Brembo-equipped 300C applications, we recommend confirming with us before choosing aftermarket; not all aftermarket lines cover those specifications in the UAE market.

The Chrysler 300 ran in two distinct generations. The first generation (2005–2010) used the 2.7-litre, 3.5-litre, or 5.7-litre HEMI engines with specific suspension geometry and brake hardware for that platform. The second generation (2011–2023) introduced a revised front suspension layout, an updated transmission unit (8HP for most V8 applications), and different rear brake specifications. Ordering by year is necessary; ordering by VIN is the correct approach.

UAE-market 300C configurations can also differ from North American spec on certain cooling system components and air intake calibration. If your 300C was purchased new in the UAE, note this when you WhatsApp us; it affects which engine service parts apply. Send your 17-digit VIN and we cross-check the specification before you travel to Ras Al Khor.

Our warehouse is at KAW Warehouse 1, Nadd Al Hamar Road, Ras Al Khor Industrial Area 2, Dubai. We are open Saturday through Thursday, 08:00–18:00. Walk-in customers are welcome; WhatsApp ahead so we can have your Chrysler parts ready at the counter.

Shelf-stock Chrysler orders placed before midday are dispatched the same day within Dubai. UAE-wide next-day delivery covers Abu Dhabi, Sharjah, Ajman, and the Northern Emirates; confirm on WhatsApp for remote locations. We do not hold stock for unconfirmed orders. Confirm your VIN and part first; then we reserve it.

Mopar genuine parts for Chrysler carry a manufacturer's warranty against defects in materials and workmanship. Claims require proof of fault: a workshop report or documented failure description. Bring the failed part and your purchase receipt to our Ras Al Khor counter. Aftermarket parts we supply carry the warranty of the respective manufacturer; we confirm terms at the time of sale.

Electrical components for Chrysler 300 (body control modules, transmission control units, sensors, ignition components) are non-returnable once fitted. Before fitting any electrical component you are uncertain about, WhatsApp us the part number and fault description. We cross-check the specification against your VIN before you commit.