Cadillac XT6 Parts
in Dubai
& the UAE

We carry shelf stock for the Cadillac XT6 at Ras Al Khor, covering the full run of the single-generation C1XX vehicle from the 2020 model year onward. Part families in regular stock include brake pads and rotors, front and rear suspension control arms and bushings, wheel bearings, stabilizer bar links, engine and cabin air filters, oil filters, and spark plugs. ACDelco and GM Genuine are the OEM lines for the XT6. Both brands are on the shelf at Ras Al Khor for this application.

Engine coverage requires attention to market and build year. The XT6 launched globally for the 2020 model year with the 3.6L V6 as the only powertrain. A 2.0L turbocharged I4 was available in China from launch and was added in North America from 2021 in the Luxury trim only; Premium Luxury and Sport continued with the V6. GCC-market builds are primarily V6, but confirm engine type via VIN before ordering oil filters, air filters, or spark plugs, as those items differ between the two engine families.

Because the XT6 is a single-generation vehicle, the ordering question is not which generation you have, but which build configuration. Trim level and drivetrain choice produce meaningful differences in the parts that fit a given vehicle. The Sport trim is equipped with a twin-clutch rear drive unit rather than the standard AWD system used on Luxury and Premium Luxury. This means the rear driveline components on a Sport build are not the same parts as on a non-Sport AWD XT6. The brake specification at the rear may also differ between Sport and non-Sport trims. FWD and AWD builds differ at the rear axle regardless of trim. Send your VIN on WhatsApp and we decode the trim and drivetrain before any part is pulled.

Engine selection is the second fitment variable. The 3.6L V6 is the engine across Premium Luxury and Sport for the full production run, and it was the only engine at global launch. The 2.0L turbocharged I4 became available on the Luxury trim in North America from the 2021 model year. GCC-market XT6 builds are not confirmed to carry this engine option, so engine type must be verified by VIN before ordering any oil filter, air filter, or spark plug for an XT6 in the UAE. The table below maps the available build configurations and the parts-relevant consequence of each.

The Cadillac XT6 shares the C1XX platform with the Cadillac XT5, the second-generation GMC Acadia (2017–2023), and the second-generation Buick Enclave and Chevrolet Traverse. A shared platform architecture does not mean shared service parts. Each of these vehicles has its own body dimensions, suspension geometry calibration, and build-specific components. The XT6 has more rear overhang than the XT5 to accommodate its third row of seating, which means body-specific and certain suspension-specific parts differ between the two despite the shared C1XX foundation.

The most common cross-fitment inquiry we handle is XT6 against XT5. Both are Cadillac, both are on C1XX, and both offer a 3.6L V6. Some service items, such as oil filters, may cross between them depending on the specific item and model year. Suspension geometry items, brake components, and any build-specific part require VIN confirmation before ordering. We do not confirm XT6-to-XT5 cross-fitment by model name alone. Send the VIN for your XT6, the specific part needed, and the source reference if you have one; we verify the part number against your exact build before anything is reserved at Ras Al Khor.

The same rule applies for any other C1XX sibling. A part confirmed for a second-generation GMC Acadia does not automatically fit an XT6. We route all C1XX platform cross-fitment queries through a VIN check. Model-name confirmation alone is not sufficient in any case.

ACDelco is the service-parts brand for the Cadillac XT6. ACDelco Gold (Professional) is the OEM-equivalent tier and the standard replacement choice for brakes, filters, suspension bushings, and other service items across the full XT6 model year range. ACDelco Original Equipment (OE) matches the factory part number exactly, the right choice when fitment tolerance is critical, such as for suspension geometry-sensitive components or Sport-trim driveline items. GM Genuine Parts is the single-tier factory OE line. Both brands are on the shelf at Ras Al Khor for XT6 applications.

Trim and engine choice determine which service items apply to a given XT6. A Sport-trim XT6 with the twin-clutch rear drive unit takes different driveline service parts from a Luxury or Premium Luxury AWD build in the same model year. A 3.6L V6 XT6 and a 2.0L turbo I4 XT6 take different oil filters, air filters, and spark plugs. Aftermarket alternatives are available for the XT6 where the customer specifies or where the application calls for a cost-effective option. The documented-fault warranty terms apply the same way as for genuine lines: electrical components are non-returnable once fitted, regardless of brand. Send your year, trim, engine, and VIN on WhatsApp and we advise the correct line for your build.

Our warehouse is at KAW Warehouse 1, Nadd Al Hamar Road, Ras Al Khor Industrial Area 2, Dubai. We are open Saturday to Thursday 08:30–19:30; Friday 08:30–12:00 and 15:00–19:30. Walk-in customers are welcome; WhatsApp your year, trim, engine type, and VIN ahead to confirm what is on the shelf before you travel.

Shelf-stock orders placed before midday are dispatched same day within Dubai. UAE-wide next-working-day delivery covers Abu Dhabi, Sharjah, Ajman, and the Northern Emirates. For remote locations, confirm lead time on WhatsApp before ordering. We do not hold parts for unconfirmed orders. Confirm your XT6 trim and VIN first; then we reserve.

ACDelco and GM Genuine Parts for the Cadillac XT6 carry a warranty against manufacturing defects. This covers brake components, suspension arms and bushings, filters, and mechanical parts across the full XT6 model year range. Aftermarket parts we supply for the XT6 also carry warranty cover where the fault is documented. Claims require proof: a workshop report or a written fault description.

Electrical components for the XT6, including ABS wheel speed sensors, TPMS modules, and engine management sensors, are non-returnable once fitted regardless of brand. Before fitting any electrical component you are uncertain about, WhatsApp us the fault code and the part in question. We verify the specification against your XT6 VIN and confirm the correct part for your build before you commit.