Chevrolet Traverse Parts
in Dubai
& the UAE

Shelf stock at Ras Al Khor covers all three Chevrolet Traverse generations. Part families in regular stock include brake pads and rotors, front and rear suspension control arms and bushings, wheel bearings, stabilizer bar links, engine and cabin air filters, oil filters, and spark plugs. First-generation Traverse (2009–2017, Lambda platform) and second-generation Traverse (2018–2023, C1XX platform) are both well represented. Third-generation Traverse (2024-on, VSS-S platform) is covered for service parts. The 2024 Traverse Limited, a C1XX carryover model year, draws from the same second-generation C1XX parts as the 2018–2023 Traverse. ACDelco and GM Genuine are the OEM lines for all three generations.

Engine coverage differs by generation. The first-generation Lambda Traverse ran the 3.6L V6 LLT throughout its production run from 2009. The second-generation C1XX Traverse launched with the 3.6L V6 as the standard engine; a 2.0L turbocharged I4 was available on the RS trim only from the 2018 model year but was discontinued starting midway through the 2019 model year, so 2020 through 2023 second-generation Traverses use the 3.6L V6 only. The third-generation VSS-S Traverse runs a 2.5T turbocharged I4 only. Oil filters, air filters, and spark plugs differ across these engine families. Send your year, engine, and VIN on WhatsApp to confirm which parts apply to your build.

The primary fitment risk with the Traverse arrives at the 2024 model year. Chevrolet produced both the all-new third-generation Traverse on the VSS-S platform and a carryover second-generation model called the Traverse Limited on the C1XX platform, selling them under the same nameplate during 2024. First deliveries of the third-generation Traverse commenced in April 2024. The two share a name and nothing relevant to parts: different platforms, different engines, different suspension architecture. The table below maps each Traverse generation and variant to its platform and the parts-relevant changes at each transition.

Within the first-generation Lambda Traverse, the 2013 facelift updated the exterior styling, interior trim, and transmission calibration without documented changes to the suspension architecture, so Lambda service and suspension parts for a 2009 Traverse generally apply to a 2017 model in the same categories. The second-generation C1XX differs completely: a different suspension geometry, a 9-speed automatic transmission standard from launch, and engine-dependent service specifications. Always send the 17-digit VIN on WhatsApp; the VIN resolves the generation, platform, and engine without ambiguity.

The Traverse and the GMC Acadia have shared the same platform at each generation, but they are separate vehicles with separate parts catalogs. The first-generation Traverse (2009–2017, Lambda) shares its architecture with the first-generation GMC Acadia (2007–2016, Lambda), the first-generation Buick Enclave, and the discontinued Saturn Outlook. The second-generation Traverse (2018–2023, C1XX) shares its platform with the second-generation GMC Acadia and the Buick Enclave. The third-generation Traverse (2024-on, VSS-S) shares its platform with the third-generation GMC Acadia. If you also operate a GMC Acadia, the Acadia parts page covers Acadia-specific fitment, including the 2017 dual-body Acadia and Acadia Limited situation that is specific to that nameplate.

Platform-sharing between the Traverse and its GMC Acadia sibling does not mean parts cross-fit freely. Some Lambda-generation service parts may be compatible between the first-generation Traverse, the first-generation Acadia, and the first-generation Enclave, depending on the specific part category, model year, and trim configuration. We do not confirm Traverse-to-Acadia or Traverse-to-Enclave cross-fitment by model name alone. The specific part number is what determines compatibility, and the starting point for that check is the 17-digit VIN for each vehicle. Send the VIN for your Traverse and the part you need on WhatsApp; we check the part against your specific build before confirming.

There is no cross-fitment between Traverse generations. A Lambda first-generation part does not cross to the C1XX second generation, and C1XX second-generation parts do not cross to the VSS-S third generation. The Traverse Limited (2024, C1XX) shares parts with the 2018–2023 second-generation Traverse, not with the 2024 third-generation Traverse. Each generation is a separate architecture, regardless of the model year in which it was sold.

ACDelco is the service-parts brand for the Traverse across all three generations. ACDelco Gold (Professional) is the OEM-equivalent tier and the standard replacement choice for brakes, filters, and suspension components. ACDelco Original Equipment (OE) matches the factory part number exactly, the right choice when fitment tolerance is critical, as it can be with suspension geometry-sensitive components on the Lambda and C1XX generations. GM Genuine Parts is the single-tier factory OE line. Both brands are stocked at Ras Al Khor for Traverse applications across all three generations.

Engine-dependent service items for the second-generation C1XX Traverse differ between the 3.6L V6 and the 2.0L turbocharged I4, though the 2.0T was available only on the RS trim from the 2018 model year and was discontinued starting midway through 2019. A second-generation Traverse with a 2.0T engine takes different oil filter and air filter specifications from a 3.6L V6 build in the same model year. Third-generation VSS-S Traverse service items are specific to the 2.5T turbocharged I4. Aftermarket alternatives are available for Traverse applications where the customer requests them or where cost is a factor. The same documented-fault warranty terms apply as for the genuine lines: electrical components are non-returnable once fitted regardless of brand. WhatsApp the year, engine, and VIN and we advise the correct line for your build.

Our warehouse is at KAW Warehouse 1, Nadd Al Hamar Road, Ras Al Khor Industrial Area 2, Dubai. We are open Saturday to Thursday 08:30–19:30; Friday 08:30–12:00 and 15:00–19:30. Walk-in customers are welcome; WhatsApp your year, engine type, and VIN ahead to confirm what is on the shelf before you travel.

Shelf-stock orders placed before midday are dispatched the same day within Dubai. UAE-wide next-working-day delivery covers Abu Dhabi, Sharjah, Ajman, and the Northern Emirates. For remote locations, confirm lead time on WhatsApp before ordering. We do not hold parts for unconfirmed orders. Confirm your Traverse generation and VIN first; then we reserve.

ACDelco and GM Genuine Parts for the Traverse carry a warranty against manufacturing defects. This covers brake components, suspension arms and bushings, filters, and mechanical parts across all three generations. Aftermarket parts we supply for Traverse also carry warranty cover where the fault is documented. Claims require proof: a workshop report or a written fault description.

Electrical components for Traverse, including ABS wheel speed sensors, TPMS modules, and engine management sensors, are non-returnable once fitted regardless of brand. Before fitting any electrical component you are uncertain about, WhatsApp us the part description and the fault code. We verify the specification against your Traverse VIN and confirm the correct part for your generation before you commit.