Jeep Wrangler Parts
in Dubai
& the UAE

We hold shelf stock for both Wrangler generations: JK (2007–2018) and JL (2018-on). Part families in regular stock include brake pads and rotors, wheel bearings, control arms and track bars, engine and cabin air filters, oil filters, spark plugs, serpentine belts, and front axle U-joints. The Wrangler's solid front and rear axle design means axle components see heavier wear in off-road use than on most other SUVs, and we stock accordingly.

For the JL generation we also carry front CV axle shafts to cover the revised front axle geometry on base trims, alongside solid Dana 44 axle shafts for Rubicon builds. Ignition components and coil packs for the 3.6 Pentastar are in regular stock across both JK and JL. WhatsApp your year, trim level, and VIN and we confirm what is on the shelf for your specific build.

All four Wrangler generations (YJ, TJ, JK, and JL) ran solid front and rear axles from the factory. That shared layout is the sourcing trap: the axle architecture sounds uniform across four decades, but spring type, engine family, body construction, and front axle geometry each changed at the generation boundaries. A suspension component or body panel that fits a 2003 TJ will not fit a 2013 JK even though both have solid axles front and rear.

Two year boundaries create ordering risk on used imports. There is no 1996 model year in the US: Jeep unveiled the TJ at the January 1996 Detroit Auto Show as a 1997 model, delivered it to dealerships in April 1996, and no YJ or TJ carries a 1996 model year badge. A Wrangler sold new in 1996 carries either a leftover 1995 YJ badge or a 1997 TJ badge, and the VIN settles which. At the other end of the sequence, 2018 is a split year: JK production continued through spring 2018 on a 2018 model designation, and JL production opened in November 2017 also carrying the 2018 model year. Model year alone does not resolve the platform for a 2018 Wrangler. Send the 17-digit VIN on WhatsApp and we confirm the generation before any part is ordered.

Mopar is the OEM parts brand for Jeep, Dodge, Chrysler, and RAM. For Wrangler, Mopar covers the full part range: brake hardware, suspension components, axle and drivetrain parts, filters, and electrical components. Mopar parts carry the factory part number and are spec-matched to the Wrangler's body-on-frame architecture and solid axle drivetrain. We stock Mopar parts for both JK and JL generations at Ras Al Khor.

We also carry aftermarket parts for Wrangler where the application suits it. Off-road use accelerates wear on suspension and axle components, and aftermarket parts offer a cost-effective replacement path for high-mileage or heavily used builds. Aftermarket parts we supply carry the same warranty terms as Mopar: fault must be documented, and electrical components are non-returnable once fitted. Tell us your trim and usage and we advise the right line for the job.

The JK (2007–2018) and JL (2018-on) are both called Wrangler, but they are different platforms requiring different parts. Within the JK itself, the 2007–2011 models used the 3.8L V6 while 2012–2018 switched to the 3.6L Pentastar. Oil filters, spark plugs, air filters, and coil packs differ between these two engines. Front axle spec also varies by trim: JK base models use a Dana 30 front axle while Rubicon uses the Dana 44. The rear follows the same split: Dana 35 on base, Dana 44 on Rubicon. Ordering the wrong axle seal, bearing, or U-joint for the wrong axle code wastes the part.

The JL (2018-on) introduced structural and drivetrain changes. The standard JL runs the 3.6L Pentastar or the 2.0L turbocharged inline-4 in markets where it is offered, and the front axle geometry changed over the JK. JL body panels are a mix of aluminum and steel, unlike the all-steel JK, so panel and hardware fitment does not cross between generations. UAE-market JL builds are predominantly Sahara and Rubicon trim levels. Send your 17-digit VIN: it tells us the axle code, engine, and trim without guesswork.

Two-door vs four-door Unlimited also affects certain body and floor components. Always confirm body style alongside generation when ordering panels, sill plates, or floor hardware. WhatsApp a photo of the existing part with the OEM number visible if you are uncertain which version you have.

Our warehouse is at KAW Warehouse 1, Nadd Al Hamar Road, Ras Al Khor Industrial Area 2, Dubai. We are open Saturday to Thursday 08:30–19:30; Friday 08:30–12:00 and 15:00–19:30. Walk-in customers are welcome; WhatsApp your VIN and part ahead to confirm from the shelf.

Shelf-stock orders placed before midday dispatch the same day within Dubai. UAE-wide next-working-day delivery covers Abu Dhabi, Sharjah, Ajman, and the Northern Emirates. WhatsApp us to confirm for remote locations. We do not hold parts for unconfirmed orders. Confirm your generation, VIN, and part first; then we reserve it.

Mopar parts carry a warranty against manufacturing defects. Aftermarket parts we supply also carry warranty cover where the fault is documented. Claims require proof: a workshop report or written failure description.

Electrical components, including sensors, ECUs, and ignition modules, are non-returnable once fitted. This applies to both Mopar and aftermarket electrical parts. Off-road builds often operate in harsh conditions; if you are fitting electrical parts to a modified Wrangler, WhatsApp us the part number and your vehicle spec before you commit. We cross-check the specification against your VIN.

Generation is the first question on any Wrangler brake or filter order. JK (2007–2018) and JL (2018-on) carry different part numbers throughout the table. One number is absent that frequently appears in cross-reference lists for this model: 68334862AB. The Mopar eStore records it as a RAM 1500 DS-platform front brake pad kit, confirmed for the 5.7L HEMI in Express, SLT, and Laramie trims. The audit found no Jeep application for it. It is not listed here; ordering it for a Wrangler based on a cross-reference is a confirmed path to the wrong part.

Numbers in this table come from the Mopar eStore (store.mopar.com). They are a fitment reference, not a stock or price list. Rotor fitment within the JL also splits by brake package: confirm 68273502AB versus 68273464AB against your trim via VIN. The A/C compressor 55111374AF is confirmed for JK production after March 2014 only; 2012 and early 2013 units need a VIN check. Send your generation, trim, and 17-digit VIN on WhatsApp and we confirm what is on the shelf at Ras Al Khor.