Ford Edge Parts
in Dubai
& the UAE

We hold Motorcraft shelf stock for Ford Edge covering the first-generation CD3 (2007–2014) and the second-generation CD4 (2015–on). Part families in regular stock include brake pads and rotors for both front and rear axles, oil filters, engine and cabin air filters, spark plugs, ignition coils, suspension control arms and bushings, front struts and rear shock absorbers, and wheel bearings. Engine coverage spans the 3.5L V6 (Duratec 35 and Ti-VCT), the 2.0L EcoBoost inline-4, and the 2.7L EcoBoost V6 introduced with the second generation.

Motorcraft catalogues filter and spark plug applications per generation and engine; the CD4's 2.0L and 2.7L EcoBoost are catalogued separately from each other and from CD3 applications. Brake hardware is documented per platform at the 2015 boundary. Confirm your exact build via VIN before ordering any of these. WhatsApp us your VIN and part family and we pull what is on the shelf for your specific year, engine, and drivetrain.

The Edge ran two distinct platforms across its production life. The first generation on CD3 (2007–2014) was a FWD-based unibody shared with the Ford Fusion, Lincoln MKZ, and Lincoln MKX, per the Wikipedia Ford CD3 platform article. First-generation engines were V6-only until the 2011 mid-cycle refresh, which added the 2.0L EcoBoost inline-4, a revised 3.5L Ti-VCT V6, and a 3.7L V6 for the Sport trim. Filter, spark plug, and ignition coil applications changed between the 2007–2010 and 2011–2014 build ranges because of these engine additions.

The second generation on CD4 (2015–on) is a different platform. CD4 brought an updated 2.0L EcoBoost (described by specification sources as a twin-scroll design), a new 2.7L EcoBoost V6, and a revised front suspension geometry. The 2019 model year introduced the Edge ST with the 2.7L EcoBoost V6 at a higher output. Suspension and brake hardware requires VIN confirmation when crossing from CD3 to CD4. The table below maps each build range to the platform code and notes what changes for part selection.

The CD3 and CD4 platforms share the same FWD-based transverse layout but are catalogued separately in suspension geometry, body dimensions, and brake hardware. Front caliper brackets, rotor diameters, hub assemblies, and strut geometry are documented per platform; do not assume a part catalogued for CD3 fits CD4 without confirming the Motorcraft number against your VIN. Within CD4, the fitment split goes further: the front suspension knuckle and wheel bearing assembly differ between the 2.0L EcoBoost and the 2.7L EcoBoost builds, as noted on our Ford parts page for this model range.

Engine platform changes also affect service parts. The CD3's 3.5L Duratec 35 and Ti-VCT V6 and the 2.0L EcoBoost I4 each require Motorcraft to catalogue their own filter and plug applications. The CD4's 2.7L EcoBoost V6 is catalogued separately again. Ordering by model name alone, without specifying engine and build year, risks the wrong part. The 17-digit VIN contains the engine code, production date, and drivetrain configuration. Send it on WhatsApp and we pull the correct part for your exact build.

The Edge's CD3 platform was shared with the Ford Fusion and Lincoln MKX (confirmed from the Ford CD3 platform page). Despite that shared origin, suspension geometry, rotor dimensions, and brake caliper hardware are catalogued separately for each model. Do not assume a part number from one model crosses to another without confirming it against each vehicle's VIN.

Ford vehicles sold in the UAE are frequently MENA-spec builds that differ from US-market equivalents. For the Edge specifically, the front suspension knuckle and wheel bearing assembly differ between 2.0L and 2.7L EcoBoost CD4 builds; this fitment split is documented on our Ford make page. VIN confirmation is the only reliable way to resolve it before ordering. The Ford make page at /ford covers the broader pattern of MENA-spec divergence across the range; the Edge is one of the model lines where the difference is explicit.

The Edge's coolant specification is tied to production dates, not model years; the complete chronology and how to identify which applies to your vehicle is covered in full at our service parts page. Send your VIN on WhatsApp and we confirm which Motorcraft coolant specification applies to your build and the correct dilution ratio for UAE conditions.

Motorcraft is Ford's genuine-parts brand for Edge. When Ford specifies a service part for an Edge, Motorcraft is the nameplate it ships under. We carry consumables on the shelf for both CD3 and CD4 Edge builds, including oil filters, air filters, spark plugs, and ignition coils. Confirm your engine code when you send the VIN.

We also carry select aftermarket brake and suspension parts for Edge where the customer specifies them. Aftermarket brake pads, rotors, and control arm bushings carry the same warranty terms as Motorcraft: documented fault required, and electrical components are non-returnable once fitted. If the Motorcraft part is not on the shelf for your exact build, we confirm an availability date. We do not substitute without telling you.

Our warehouse is at KAW Warehouse 1, Nadd Al Hamar Road, Ras Al Khor Industrial Area 2, Dubai. We are open Saturday to Thursday 08:30–19:30; Friday 08:30–12:00 and 15:00–19:30. Walk-in customers are welcome; WhatsApp your VIN and the part ahead to confirm from the shelf.

Shelf-stock orders placed before midday are dispatched the same day within Dubai. Next-working-day delivery covers Abu Dhabi, Sharjah, Ajman, and the Northern Emirates. Confirm on WhatsApp for remote locations. We do not hold Edge parts for unconfirmed orders. Confirm your generation (CD3 or CD4), engine, and VIN first, then we reserve it.

Motorcraft parts carry warranty against manufacturing defects. Aftermarket parts we supply for Edge also carry warranty cover where the fault is documented. Claims require proof: a workshop report or written failure description.

Electrical Edge components, including sensors, PCM and TCM modules, SYNC infotainment units, and ABS control modules, are non-returnable once fitted. Before fitting any electrical part you are uncertain about, WhatsApp us the part number and your VIN. We cross-check against your generation and trim before you commit to the purchase.